';

CenturionPro Hemp Harvesting Solutions

Industrial Hemp Processing Equipment

Industrial Hemp Harvesting Solutions

Hemp Bucking

Bucking, otherwise known as de-budding or de-stemming, is the process of removing the flower and leaves from the stem. Some hemp processors will take this untrimmed material and process it as is. Others will take the material and then use it to produce a premium oil or distillate. Most hemp processing requires bucking, with the exception being those that process the entire plant. These processors are the minority in the hemp industry and often use lower quality hemp.

CenturionPro Buckers can process up to 500+ lbs/hour of fully hydrated flowers. Making them the highest capacity Bucker system in the world. Production of this magnitude can replace over 20 human workers and at prices ranging from $4995 and up, the value is unprecedented when it comes to hemp harvesting equipment.

Hemp Bucking Machines

THE HP BUCKERS

HP refers to “High Performance” and represents our workhorse line of buckers, which include single and triple-workstation options. The high production value of these machines results in the industry’s highest buck rate per hour. The HP line utilizes two rollers that pull the stem into the machine, therefore popping the flowers off. This allows you to continuously feed the bucker for more efficient de-stemming.

The single workstation can process 175lbs wet or 35lbs dry per hour while the triple workstation can process 500lbs wet or 100lbs dry per hour!

Industrial Hemp Bucking Machines

THE XL MEGABUCKER

The world’s first industrial scale bucking machine for commercial hemp growers. Accommodating up to 16 operators this bucking Goliath can run up to 2400 lbs of wet material per hour. Combine with CenturionPro XL hemp trimmers to achieve the highest capacity hemp harvesting system in the world!

Industrial Hemp Harvesting Solutions

Hemp Trimming

Hemp trimming primarily applies to those looking to produce a premium oil or distillate. It is also applicable to growers looking to produce a smokable hemp flower. Trimming can be done either by hand or by using an automated trimming machine. Due to the large harvests typically associated with hemp processing, automated trimming is the most practical solution.

Hemp trimming with a CenturionPro trimming machine can be done either before or after the drying process and all machines comes with both wet and dry tumblers. If you only trim dry or wet, you can elect to receive double wet or double dry tumblers instead. This is ideal for customers with large harvests that can’t afford down-time as you simply insert your spare tumbler instead of stopping production for a full clean.

CenturionPro trimmers can process up to 1800 lbs/hour of fully hydrated flowers. Making them the highest capacity trimming system in the world. Production of this magnitude can replace up to 350-400 human workers and at prices ranging from $22,995 and up, the value is unprecedented when it comes to hemp harvesting equipment.

Hemp Trimming Machine

THE 3.0

The 3.0 Medical Grade Trimming System is one of the highest industrial capacity automated trimmers in the world – and it comes Health Canada/FDA ready! This machine is composed of medical grade anodized aluminum and stainless-steel components to meet all regulatory standards. This machine can replace up to 160 human trimmers – without sacrificing quality and will harvest a whopping 200lbs of wet product or 40lbs of dry product per hour of use!

Industrial Hemp Trimming Machines

THE XL 5.0

The CenturionPro Solutions XL 5.0 is the little brother to our XL 10.0 beast. This smaller version of our industrial trimmer is just as impressive with a 1500 lb wet / 300 lb dry hourly processing rate! This powerful machine produces 420,000 cuts per minute and can replace 1200 human trimmers. The industry leading power of the XL 5.0 provides continuous duty operation and reliability to tackle even the most demanding of harvests. The industry leading processing capability of the XL 5.0 results in a lean workflow with just a single piece of equipment. Compliant with health and safety authorities, the XL 5.0 also comes with a 5 year warranty.

Industrial Hemp Trimming Machines

THE XL 10.0

Meet the latest innovation from CenturionPro Solutions – the XL 10.0! This industrial trimmer is shattering records with its up to 3000 lb wet / 600 lb dry hourly processing rate! A beast of a machine, this system produces 840,000 cuts per minute and can replace up to 2400 human trimmers. The industry leading power of the XL 10.0 provides continuous duty operation and reliability to tackle even the most demanding of harvests. The industry leading processing capability of the XL 10.0 results in a lean workflow with just a single piece of equipment. Compliant with health and safety authorities, the XL 10.0 also comes with a 5 year trimmer warranty.

JOIN THE LEGION NEWSLETTER

Subscribe to receive emails from CenturionPro and be among the first to hear about new products, articles, videos and more.

reCAPTCHA is required.