';

CenturionPro CBD Hemp Harvesting Equipment

Industrial Hemp Harvesting Solutions

Hemp Harvesting Solutions

Hemp Bucking

Bucking, otherwise known as de-budding or de-stemming, is the process of removing the flower and leaves from the stem. Some hemp processors will take this untrimmed material and process it as is. Others will take the material and then use it to produce a premium CBD oil or distillate. Most hemp processing requires bucking, with the exception being those that process the entire plant. These processors are the minority in the hemp industry and often use lower quality hemp.

CenturionPro buckers can process up to 500+ lbs/hour of fully hydrated flowers. Making them the highest capacity Bucker system in the world. Production of this magnitude can replace over 20 human workers and at prices ranging from $4995 and up, the value is unprecedented when it comes to hemp harvesting equipment.

Hemp & Cannabis Buckers

THE GC BUCKERS

The brand new CenturionPro GC Bucker is an operator-run de-stemming machine that requires the operator to apply gentle pressure to feed the stem in the machine. GC refers to “Gentle Cut” as we appreciate and understand how delicate your flowers are. Similar to scissors, this Bucker cuts the flowers off the stem, as opposed to pulling and popping them. This cutting action prevents the large crown buds from breaking apart into smaller pieces, thereby keeping the complete structure of the buds fully intact preserving the look of your flower.

The single workstation can process 40+ lbs wet or 8lbs dry per hour and the triple workstation can process 120+ lbs wet or 24lbs dry per hour.

Hemp & Cannabis Buckers

THE HP BUCKERS

HP refers to “High Performance” and represents our workhorse line of buckers, which include single and triple-workstation options. The high production value of these machines results in the industry’s highest buck rate per hour. The HP line utilizes two rollers that pull the stem into the machine, therefore popping the flowers off. This allows you to continuously feed the bucker for more efficient de-stemming.

The single workstation can process 175lbs wet or 35lbs dry per hour while the triple workstation can process 500lbs wet or 100lbs dry per hour!

Hemp Harvesting Solutions

Hemp Trimming

Hemp trimming primarily applies to those looking to produce a premium CBD oil or distillate. It is also applicable to growers looking to produce a smokable CBD flower. Trimming can be done either by hand or by using an automated trimming machine. Due to the large harvests typically associated with hemp processing, automated trimming is the most practical solution.

Hemp trimming with a CenturionPro trimming machine can be done either before or after the drying process and all machines comes with both wet and dry tumblers. If you only trim dry or wet, you can elect to receive double wet or double dry tumblers instead. This is ideal for customers with large harvests that can’t afford down-time as you simply insert your spare tumbler instead of stopping production for a full clean.

CenturionPro trimmers can process up to 1800 lbs/hour of fully hydrated flowers. Making them the highest capacity trimming system in the world. Production of this magnitude can replace up to 350-400 human workers and at prices ranging from $22,995 and up, the value is unprecedented when it comes to hemp harvesting equipment.

Hemp & Cannabis Trimmers

THE 3.0

The 3.0 Medical Grade Trimming System is one of the highest industrial capacity automated trimmers in the world – and it comes Health Canada/FDA ready! This machine is composed of medical grade anodized aluminum and stainless-steel components to meet all regulatory standards. This machine can replace up to 75 human trimmers – without sacrificing quality and will harvest a whopping 250lbs of wet product or 50lbs of dry product per hour of use!

Industrial Hemp & Cannabis Trimmers

THE XL 5.0

COMING SOON!

The CenturionPro Solutions XL 5.0 is the little brother to our XL 10.0 beast. This smaller version of our industrial trimmer is just as impressive with a 900 lb wet / 180 lb dry hourly processing rate! This powerful machine produces 420,000 cuts per minute and can replace up to 175-200 human trimmers. The industry leading power of the XL 5.0 provides continuous duty operation and reliability to tackle even the most demanding of harvests. The industry leading processing capability of the XL 5.0 results in a lean workflow with just a single piece of equipment. Compliant with health and safety authorities, the XL 5.0 also comes with our standard 10 year trimmer warranty.

Industrial Hemp & Cannabis Trimmers

THE XL 10.0

COMING SOON!

Meet the latest innovation from CenturionPro Solutions – the XL 10.0! This industrial trimmer is shattering records with its up to 1,800 lb wet / 360 lb dry hourly processing rate! A beast of a machine, this system produces 840,000 cuts per minute and can replace up to 350-400 human trimmers. The industry leading power of the XL 10.0 provides continuous duty operation and reliability to tackle even the most demanding of harvests. The industry leading processing capability of the XL 10.0 results in a lean workflow with just a single piece of equipment. Compliant with health and safety authorities, the XL 10.0 also comes with our standard 10 year trimmer warranty.